42 - BIOS utilityBIOS UTILITYThe BIOS utility is a hardware configuration program built into yourcomputer's BIOS.Your computer is already properly configured and optimized, and youdo not normally need to run this utility. However, if you encounterconfiguration problems, you may need to run it.To activate the BIOS utility, press <F2> during the POST while thecomputer logo is being displayed.Boot sequenceTo set the boot sequence in the BIOS utility, activate the BIOS utility,then select Boot from the categories listed at the top of the screen.Setting passwordsTo set a password on boot, activate the BIOS utility, then selectSecurity from the categories listed at the top of the screen. FindPassword on boot: and use the <F5> and <F6> keys to enable thisfeature.
