Englsh2Installing the Battery1. Remove the battery cover. (llustraton #1~3)2. Insert the battery wth the electrcal contactfacng downward and away from the lens.(illustration #4)3. Ensure that the battery pull tab extends fromunder the battery. (llustraton #5)4. Slide the battery cover back into place overthe battery pull tab. (illustration #6~7)12345761. Remove protecton cap and nsert the plug.(llustraton #1~2)2. Connect the charger. (illustration #3~4)3. Durng chargng the LED ndcator lghts red.(llustraton #5)......................................Warning: Projector wll not charge whleoperatng.4. The LED Charge Indicator will go off whenbattery s fully charged. Ths process may takeup to 2.5 hours.......................................Note: Led ndcatorOperatonBattery chargngCharge completeCharging the Battery21345Getting Started.....................................................................................................Note: After the projector s turned off, the battery may not start chargng rght away due to over temperatureprotecton.......................................................................................................Warning:Battery chargng The accessory batteries have a small amount power at the time of purchase. The fi rstcharge should last for 6 hours and the machne should not be used durng chargng.Battery ndcator Indcaton for 3 stages or sectons. ( 50%/20%/5%)Notes on batteryuse1. When the batteres are used, chargng wll automatcally stop f ther temperature sgreater than 45ā.2. After they cool down, chargng wll resume and you do not have to plug or unplug thebatteres/adapter.3. It s not recommended to charge the batteres mmedately after use.