Acer CR-5130 User Manual
                                                                       | |
Contents
| 
19Charging the Battery1. Make sure the camera power is off.2. Slide the battery/SD Memory Card cover into the direction of the [OPEN] arrow.3. Insert the battery, noting correct polarity (+ and -).4. Slide the battery lock lever to adjust the battery.5. Close the battery/SD Memory Card cover firmly.6. Connect one end of the AC power adapter to the DC IN 5V terminal.7. Connect the other end of the AC power adapter to a power outlet.Charging start: Green indicatorCharging end: Indicator offStand by: Orange indicatorReplace a new battery: Red indicatorNote:Make sure to use only the AC power adapter specified for the camera. Damage caused bythe use of an incorrect adapter is not covered under the warranty.When the charging is not started even if proceeding the operation above. Press powerbutton on at any mode after LCD indication appears, then turn the power off.Never use the battery unspecified for the camera.Do not place the camera in hot temperature. Use it at room temperature.If you open the battery cover without removing the battery, the power will not be quit.If you remove the battery, you have to insert the battery again in a period of 2 hours inorder to make sure that the date and time will not be reset.New battery or the battery that has not been used for an extended period of time (thebattery that passed the expiry date is an exception) might affect the number of picturesthat can be taken. Therefore, to maximize its performance and lifetime, we recommendthat you fully charge the battery and discharge it for at least one complete cycle beforeuse. |
Related manuals for Acer CR-5130
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine