EN-13User’s Manual >>Charging the BatteryUsing the optional AC power adapter may charge the battery or operate thecamera as power supply. Make sure that the power of the camera is off and theninsert the battery before starting.1. Insert one end of the AC power adapterinto the DC IN 5V terminal of the camera.2. Insert the other end of the AC poweradapter into a wall outlet.The status LED lights red whencharging is started and goes outwhen charging is completed.It is recommended to fully dischargethe battery before recharging.Charging time varies according to theambient temperature and the statusof battery.This camera must be used with specified AC power adapter. Damagecaused by the use of an incorrect adapter is not covered under thewarranty.Always make sure that the camera is off before removing the battery.The battery may feel warm after it has been charged or immediately afterbeing used. This is normal and not a malfunction.When using the camera in cold conditions, keep the camera and batterywarm by storing it in a warm place such as an interior pocket betweenshots.If you open the battery cover without removing the battery, the batterypower will not be disconnected.If you remove the battery, you have to insert the battery within twohours in order to make sure that the date and time will not be reset.