|
47Englishb -“Backup to optical device” to store the backup disc imageon CD or DVD.7 After choosing the backup method, click “Next”.Follow the instruction on screen to complete the process.Restore from backupUser can restore backup previously created (as stated in Create backupsection) from hard drive, CD, or DVD.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six 0s.4 In the Acer eRecovery window, select “Recovery actions” and click“Next”.5 There are four restore actions available. Select the desired restoreaction and follow the onscreen instructions to complete therestore process.Note: The “Restore C:” item is enabled only if there is a userbackup stored on the hard drive (D:\). Please refer to the Createbackup section.Create factory default image CDWhen the System CD and Recovery CD are not available, you can createthem by using this feature.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six 0s.4 In the Acer eRecovery window, select “Recovery settings” and click“Next”.5 In the Recovery settings window, select “Burn image to disk” andclick “Next”.6 In the Burn image to disc, select “01. Factory default image” andclick “Next”.7 Follow the instructions on screen to complete the process.
|
