iiiInformation for your safety andcomfortRead these instructions carefully. Keep this document for future reference.Follow all warnings and instructions marked on the product.Turning the product off before cleaningUnplug this product from the wall outlet before cleaning. Do not use liquidcleaners or aerosol cleaners. Use a damp cloth for cleaning.Caution for plug as disconnecting deviceObserve the following guidelines when connecting and disconnecting power tothe external power supply unit:• Install the power supply unit before connecting the power cord to the ACpower outlet.• Unplug the power cord before removing the power supply unit from theprojector.• If the system has multiple sources of power, disconnect power from thesystem by unplugging all power cords from the power supplies.Caution for AccessibilityBe sure that the power outlet you plug the power cord into is easily accessibleand located as close to the equipment operator as possible. When you need todisconnect power to the equipment, be sure to unplug the power cord from theelectrical outlet.Warnings!• Do not use this product near water.• Do not place this product on an unstable cart, stand or table. If the productfalls, it could be seriously damaged.• Slots and openings are provided for ventilation to ensure reliableoperation of the product and to protect it from overheating. Theseopenings must not be blocked or covered. The openings should never beblocked by placing the product on a bed, sofa, rug or other similar surface.This product should never be placed near or over a radiator or heat register, orin a built-in installation unless proper ventilation is provided.• Never push objects of any kind into this product through cabinet slots asthey may touch dangerous voltage points or short-out parts that couldresult in a fire or electric shock. Never spill liquid of any kind onto or intothe product.Downloaded From projector-manual.com Acer Manuals