Acer H6500 SERIES User Manual

Also see for H6500 Series: User guide User guide Service manual

vimight cause fire or electric shock. In this case, unplug immediately andcontact your dealer.• Do not keep using this product to break or drop it. In this case contact yourdealer for inspection.• Do not face the projector lens to the sun. It can lead to fire.• When switching the projector off, suggest to ensure the projectorcompletes its cooling cycle before disconnecting power.• Do not frequently turn off the main power abruptly or unplug theprojector during operation. The best way is to wait for the fan to turn offbefore turning main power off.• Do not touch air outlet grille and bottom plate which becomes hot.• Clean the air filter frequently if have. The temperature inside may rise andcause damage when the filter/ventilation slots clogged with dirt or dust.• Do not look into the air outlet grille when projector is operating. It mayhurt your eyes.• Always open the lens shutter or remove the lens cap when the projector ison.• Do not block the projector lens with any object when the projector isunder operation as this could cause the object to become heated anddeformed or even cause a fire. To temporarily turn off the lamp, press HIDEon the remote control.• The lamp becomes extremely hot during operation. Allow the projector tocool for approximately 45 minutes prior to removing the lamp assembly forreplacement.• Do not operate lamps beyond the rated lamp life. It could cause it to breakon rare occasions.• Never replace the lamp assembly or any electronic components unless theprojector is unplugged.• The product will detect the life of the lamp itself. Please be sure to changethe lamp when is showing warning message.• When changing the lamp, please allow unit to cool down, and follow allchanging instructions.• Reset the "Lamp Hour Reset" function from the Onscreen display"Management" menu after replacing the lamp module.• Do not attempt to disassemble this projector. There are dangerous highvoltages inside which may hurt you. The only user serviceable part is thelamp which has its own removable cover. Refer servicing only to suitablequalified professional service personnel.• Do not stand the projector on end vertically. It may cause the projector tofall over, causing injury or damage.• This product is capable of displaying inverted images for ceiling mountinstallation. Only use acer ceiling mount kit for mounting the projectorand ensure it is securely installed.Downloaded from ProjectorsManual.com Manuals