10English Adjusting the Projected ImageAdjusting the Height of Projected ImageThe projector is equipped with elevator feet for adjusting the height of image.To raise the image:1 Press the elevator foot release. (Illustration #1)2 Raise the image to the desired height angle (Illustration #2), then releasethe button to lock the elevator foot into position.3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.To lower the image:1 Press the elevator foot release. (Illustration #1)2 Lower the image to the desired height angle (Illustration #2) , then releasethe button to lock the elevator foot into position.3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.123 3Elevator footrelease buttonTilt adjusting wheel Elevator foot Tilt adjusting wheel