EN-5CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct typerequired for your area. This monitor has a universal power supply that allows operation in either100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of the power cord to the AC inlet, and plug the other endinto an AC outlet. For unit using at 120 V AC:Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. For unit using at 220/240 V AC (outside of U.S.):Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. Thecord set should have the appropriate safety approvals for the country inwhich the equipment will be installed. Please confirm the distribution system in building installation shall providethe circuit breaker rated 120/240 V, 20 A (maximum).SAFETY PRECAUTION Avoid placing the monitor, or any other heavy object, on the power cordto avoid damage to the cable. Do not expose the monitor to rain, excessive moisture, or dust. Do not cover the ventilation slots or openings of the monitor. Always putthe monitor in a place where there is adequate ventilation. Avoid placing the monitor against a bright background or where sun-lightor other light sources may reflect on the face of the monitor. Place themonitor just below eye level. Handle with care when transporting the monitor. Refrain from giving shock or scratch to the screen, as screen is fragile. In order to prevent damage to the monitor, do not lift the monitor by itsbase.CLEANING YOUR MONITORPlease carefully follow the below guidelines when cleaning the monitor. Always unplug the monitor before cleaning. Use a soft cloth to gently wipe the screen and cabinet front and sides. NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN ORCASE. PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ONTHE LCD DISPLAY SCREEN OR CASE. Acer will not be liable for damage resulting from use of any ammonia oralcohol-based cleaners.