Acer P223 Service Manual
Also see for P223: User manual
                                            | |
Use a Phillips-head screwdriver screwed theNo.1~4 screws till that interface board and bracketchassis base firmly attached.Use a Phillips-head screwdriver screwed theNo.1~4 screws till that power board and bracketchassis base firmly attached.(No1 screwsize=M4x8; No2~4 screw size=M3x6;Torque=9~10KGFxCM).Take a bracket chassis base on a protectivecushion and stick an insulator on the specificposition, take a power board and turn it over. Then,put it on the specific positions of bracket chassisbase.Connect the cable between power board(P802)and interface board (P301)Connect the function key cable into interfaceboard(P306)Connect the FFC cable into interface boardTake the key function cable out from the holeshown as photoFix the function key cable with a PVC tapeTurn the monitor faced down and put it on theBracket Chassis module till both parts firmlyTake lamp cables out from the holes shown asthe photo.Connect the FFC cable to the connector of the LCDpanel.S5S3S2S112344.1 Assembly procedures:4. Assembly and Disassembly ProceduresP301P802P306FFC1234S4S7S612Go to cover pageACER P223W |
Related manuals for Acer P223
manualsdatabase
Your AI-powered manual search engine