Quick StartINSTALLATIONConnecting to a Computer1. Ensure the projector and your com-puter are turned off.2. Connect one end of the VGA cableto the “VGA In” connector on theprojector; connect the other endto the VGA connector on the com-puter and tighten the screws.3. Connect one end of the power cordinto the AC power socket on theprojector; connect the other end toan electrical outlet.Powering On the ProjectorINTERFACE CONNECTORPowering On the Projector1. Remove the lens cap.2. Turn on the projector first and thenthe computer.3. Adjust the position, focus and zoom.4. Run you presentation.Powering Off the Projector1. Press the power button twice.2. Do not remote AC power cord fromoutlet until the projector fan shutdown.English84213576DVIRGBUSBDVD Player,Settop Box,HDTV receiver1. Power Cord2. VGA Cable3. Composite Video Cable4. USB Cable5. VGA to Component/HDTV Adapter6. S-Video Cable7. Audio Cable Jack/Jack8. DVI Cable (Optional Accessory)9. 5V DC Output Jack for attachedDongle Device (Optional)Video OutputS-Video Outputwith DVI modelwithout DVI model9