Quick StartINSTALLATIONConnecting to a Computer1. Ensure the projector and yourcomputer are turned off.2. Connect one end of the VGA cableto the "VGA In" connector on theprojector; connect the other end tothe VGA connector on thecomputer and tighten the screws.3. Connect one end of the powercord into the AC power socket onthe projector; connect the otherend to an electrical outlet.Powering On the ProjectorINTERFACE CONNECTORPowering On the Projector1. Remove the lens cap.2. Turn on the projector first and thenthe computer.3. Adjust the position, focus and zoom.4. Run you presentation.Powering Off the Projector1. Press the power button twice.2. Do not remote AC power cord fromoutlet until the projector fan shutdown.EnglishS-Video OutputVideo Output8 4 2 913576RS232DVIRGBUSBDVD Player,Settop Box,HDTV receiver1. Power Cord2. VGA Cable3. Composite Video Cable4. USB Cable5. VGA to Component/HDTV Adapter6. S-Video Cable7. Audio Cable Jack/Jack8. RS232 Cable (Optional Accessory)9. DVI Cable (Optional Accessory)