Acer PD724 series Manual
                                                           | |
Contents
| 
9 ... EnglishAppendicesReplacing the lampThe projector will detect the lamp life itself. It will show you awarning message “Lamp is approaching the end of its usefullife in full power operation. Replacement Suggested!” Whenyou see this message, changing the lamp as soon as possible.Make sure the projector has been cooled down for at least 30minutes before changing the lamp.Warning: Lampcompartment is hot!Allow it to cool downbefore changing lamp!Warning: Toreduce the risk ofpersonal injury, do notdrop the lamp moduleor touch the lamp bulb.The bulb may shatterand cause injury if it isdropped.1 342Lamp Changing Procedure:1. Turn the power off the projector by pressing the Power button.2. Allow the projector to cool down at least 30 minutes.3. Disconnect the power cord.4. Remove the cover.5. Push up and remove the cover. 6. Remove the 3 screws from the lamp module.7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. |
Related manuals for Acer PD724 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine