Index 137Cache scheme, 3-31External cache, 3-30Internal cache, 3-30Memory at 15MB-16MB reserved for, 3-31Memory parity mode, 3-31Modem ring-in function, 2-15NNum lock after boot, 3-23OOnboard connector functiion, 2-7Onboard device settings, 3-17Floppy disk controller, 3-17IDE controller, 3-17Onboard audio chip, 3-18Onboard Ethernet chip, 3-18PS/2 mouse controller, 3-17USB host controller, 3-17USB legacy mode, 3-18Onboard peripherals, 3-14Onboard device settings, 3-17Parallel port, 3-15Serial port 1, 3-14Operating the CD-ROM drive, A-5Emergency eject, A-6Starting the drive, A-5PParallel port, 3-15Base address, 3-15ECP DMA channel, 3-16IRQ, 3-15Operation mode, 3-16PnP/PCI options, 3-32Graphics aperture size, 3-33PCI IRQ setting, 3-32PCI IRQ sharing, 3-33PCI slots, 3-32Plug and play OS, 3-34Reset resource assignments, 3-34VGA palette snoop, 3-33Post-installation instructions, 4-3Power management, 3-19Power management mode, 3-19Power switch < 4 sec., 3-20Schedule resume from suspend, 3-20System wake-up event, 3-20Power management mode, 3-19IDE hard disk standby timer, 3-19Sleep mode, 3-20System sleep timer, 3-20Power switch < 4 sec., 3-20Power-on password, 3-28Operation mode, 3-28Pre-installation instructions, 4-2Precautions, A-2During operation, A-2When handling a disc, A-2Preinstallation, 1-1Selecting a site, 1-1Unpacking components, 1-1Primary display adapter, 3-22Processor, 3-4Processor speed, 3-4Product information, 3-7DMI BIOS version, 3-8Main board ID, 3-8Main board S/N, 3-8Product name, 3-7System BIOS version, 3-8System S/N, 3-7Product name, 3-7RRear panel, 1-3Reconfiguring the system, 4-15Removing a DIMM, 4-15Removing and replacing the housing cover, 4-4Housing cover, removing, 4-4