Video and audio connectors - 59V IDEO AND AUDIO C O N N E C T O R SConnect to a monitor with a VGA or DVI port (the type ofconnection supported depends on your computer’sconfiguration). The appropriate cable is usually included withthe monitor.Follow these steps to connect an monitor to your computer:1. Check that the computer is powered off and the monitorpower switch is turned off.2.Attach the video cable to the monitor port on thecomputer. Secure the cable connection with the screwsprovided.3.Connect the monitor power cable and plug it into aproperly grounded wall outlet.4.Follow any setup instructions in the monitor's user's guide.5.Turn on power to the monitor, then the computer.6.Make sure that the current resolution and refresh rate donot exceed the specifications of the monitor. If necessarychange the display settings used by the computer.Headphones and microphoneThese ports allow you to connect audio devices. Use theheadphone port to plug in stereo headphones or poweredspeakers. Plugging an audio device to the headphone portdisables the built-in speakers. Use the microphone port toconnect an external microphone for mono recording;NoteTo access the display controls, press the Windows key ( ) + W,type "Display" and then click on Display.