31Hardware Installation and ConfigurationHardware Installation1.Ensure that you have got the all of the hardware requirements of Acer’scluster server, and refer to the architecture of Acer’s Cluster to build upthe cluster.2.Connect the private network between two nodes by using the STP cross-over cable.3.You must insert another NIC on each node and connect them to thePublic Network (Hub).4.Connect the External SCSI Cables between two Hosts and the AcerAltosRS700.Hardware Configuration1.Host configurationa)Power on each AcerAltos Server and press + for theSCSISelect™Utilitywhenthescreenshowsthismessage:"Adaptec AIC-7880 Ultra/Ultra W BIOS V 1.x".b)Click the "Configure/View Host Adapter Setting" and choose theSCSI channel 1(which connects to the AcerAltos RS700).c)Enable the Host Adapter SCSI Termination function.d)EnabletheMultipleLUNSupportfunctionintheAdvancedConfiguration options.e)Set the host’s SCSI ID to 6 for SCSI channel 1 of Host 1.Set thehost’s SCSI ID to 7 for SCSI channel 1 of Host 2.
