Chapter 2 37The table below describes the parameters in this screen.Exit Saving ChangesAllows the user to save changes and reboot the system.The following message is shown when user presses “Enter” on the itemSystem will reboot if Yes is selected and will stay in Setup if No is selected..Exit Discarding ChangesAllows the user to not save changes before exiting Setup.The following message is shown when user presses “Enter” on this item.System will reboot after either selection.Load Setup DefaultAllows the user to load default values in Setup. The following message is shown when user presses “Enter”on this item:.It still stay in Setup after either selection.Parameter DescriptionExit Saving Changes Exit System Setup and save your changes to CMOS.Exit DiscardingChangesExit utility without saving setup data to CMOS.Load Setup Default Load default values for all SETUP item.Discard Changes Load previous values from CMOS for all SETUP items.Save Changes Save Setup Data to CMOS.Setup ConfirmationSave configuration changes and exit now[ Yes] [No]Exit discarding changes?[Yes] [No]Setup ConfirmationLoad default configuration now?[ Yes] [No]
