|
49EnglishCreate factory default image CDWhen the System CD and Recovery CD are not available, you can create them byusing this feature.1 Boot to Windows XP.2 Press + to open the Acer eRecovery Management utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery Management window, select Recovery settings andclick Next.5 In the Recovery settings window, select Burn image to disk and click Next.6 In the Burn image to disk window, select 01. Factory default image andclick Next.7 Follow the instructions on screen to complete the process.Re-install bundled software without CDAcer eRecovery Management stores pre-loaded software internally for easydriver and application re-installation.1 Boot to Windows XP.2 Press + to open the Acer eRecovery Management utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery Management window, select Recovery actions andclick Next.5 In the Recovery settings window, select Reinstall applications/drivers andclick Next.6 Select the desired driver/application and follow the instructions on screento re-install.At first launch, Acer eRecovery Management prepares all the needed softwareand may take few seconds to bring up the software content window.
|
