30 Chapter 2Multi-Boot MenuUsers can press F12 during POST to enter the Multi Boot Selection Menu. In this menu users can change bootdevice without entering BIOS SETUP utility.NOTE: If users disable the multi boot selection menu in BIOS SETUP utility, the message “ Press F12 to enterthe multi boot selection menu” will not appear during POST.NOTE: If users disable the “Boot from LAN” option in BIOS SETUP utility, then the option of Realtek PXE2.0Boot Agent will not appear.Navigating the BIOS UtilityThere are six menu options: System Information, Basic System Settings, Startup Configuration, OnboardDevice Configuration, System Security and Loading Default Settings.To enter a menu, highlight the item using the wwww / yyyy keys, then press eeee.Within a menu, navigate through the BIOS Utility by following these instructions:! Press the wwww / yyyy keys to move between the parameters.! Press the zzzz / xxxxkeys to change the value of a parameter.! Press the |||| key while you are in any of the menu options to return to the main menu.NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys areshown at the bottom of the screen.Boot MenuFloppy DiskCD-ROMHard DiskRealtek PXE2.0 Boot Agent#$ = Move highlight bar, Esc = Exit, F2 = Enter SETUPBoot MenuFloppy DiskCD-ROMHard DiskRealtek PXE2.0 Boot Agent#$ = Move highlight bar, Esc = Exit, F2 = Enter SETUPBoot MenuBoot MenuFloppy DiskCD-ROMHard DiskRealtek PXE2.0 Boot AgentFloppy DiskCD-ROMHard DiskRealtek PXE2.0 Boot Agent#$ = Move highlight bar, Esc = Exit, F2 = Enter SETUP#$ = Move highlight bar, Esc = Exit, F2 = Enter SETUP
