| 
40English Restore from backupYou can restore backups previously created (as stated in the Create backupsection) from hard disk, CD or DVD.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery actions and click Next.5 Select the desired restore action and follow the onscreen instructions tocomplete the restore process.Note: The "Restore C:" item is enabled only if there is a userbackup stored on the hard disk (D:\). Please refer to the Createbackup section.Create factory default image CDWhen the System CD and Recovery CD are not available, you can create them byusing this feature.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery settings and click Next.5 In the Recovery settings window, select Burn image to disk and click Next.6 In the Burn image to disk window, select 01. Factory default image andclick Next.7 Follow the instructions on screen to complete the process.Re-install bundled software without CDAcer eRecovery stores pre-loaded software internally for easy driver andapplication re-installation.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery actions and click Next.5 In the Recovery settings window, select Reinstall applications/drivers andclick Next. |
