Chapter 2 31MainThe Main screen allows the user to set the system time and date as well as enable and disable boot optionand recovery.NOTE: The screen above is for your reference only. Actual values may differ.The table below describes the parameters in this screen. Settings in boldface are the default and suggestedparameter settings.NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This isbecause the user is not allowed to control the settings in these cases.Parameter Description Format/OptionSystem Time Sets the system time. The hours are displayed with 24-hour format.Format: HH:MM:SS(hour:minute:second)System Date Sets the system date. Format MM/DD/YYYY(month/day/year)Total Memory This field reports the memory size of the system.Memory size is fixed to 3017 MB.N/AVideo Memory Shows the video memory size. VGA Memory size=32 MB N/AQuick Boot Allows startup to skip certain tests while booting,decreasing the time needed to boot the system.Option: Enabled or DisabledNetwork Boot Enables, disables the system boot from LAN (remoteserver).Option: Enabled or DisabledF12 Boot Menu Enables, disables Boot Menu during POST. Option: Enabled or EnabledD2D Recovery Enables, disables D2D Recovery function. The functionallows the user to create a hidden partition on hard discdrive to store operation system and restore the systemto factory defaults.Option: Enabled or DisabledSATA Mode Control the mode in which the SATA controller shouldoperate.Option: AHCI or IDE ModeInsydeH20 Setup Utility Rev. 3.5Information Main Advanced Security Power Boot ExitItem Specific HelpSystem Time [13:04:04] This is the help for theSystem Date [06/04/2008] hour field. Valid rangeis from 0 to 23.Total Memory 4095 MB INCREASE/REDUCE : F5/F6Video Memory [256MB]Quick Boot [Enabled]Network Boot [Enabled]F12 Boot Menu [Enabled]D2D Recovery [Enabled]SATA Mode [AHCI]F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup DefaultESC Exit ←→ Select Menu Enter SelectXSubMenu F10 Save and Exit
