Acer TravelMate 610 Service Manual

Also see for TravelMate 610 series: User guide

Contents

Acer TravelMate 610 Service Manual Manual pdf 51 page image

Chapter 2 434. Exit to main menu:USB TestThis function will test USB Connect/Disconnect of TravelMate 610 notebook series.UHCI/OHCI test utility:1. Please prepare a USB device such as USB mouse, USB keyboard, USB floppy diskette or USB modem,and leave the USB ports disconnected.NOTE: The diagnostic program will not be interrupted by disconnecting the USB diskette.2. The program will dynamically detect the incoming device for 2 USB ports. Plug the USB connector on thefirst USB port, then un-plug it (connect at one time and disconnect at another time). To continue testingthe second USB port, repeat the connect/disconnect procedure.The testing program will show an account of connection/disconnection if every step is doing right.Consequently, a "PASS" message appears on the screen, otherwise, it displays "FAIL".Smart Card TestInsert Smart Card into the socket of the left panel. If it is doing well, the message "PASSED!!!" will be shown onthe screen.Infrared Ray (IR) TestThis function will test Infrared Ray of Acer TravelMate 610 series. Following are the steps:1. Please prepare 2 machines. Choose "Test_program for Server" for one of the machines and choose "1"for Baud_Rate.2. Choose "Test_program for Client" for the other machine.3. Make the IR ports of the 2 machines close, then, after the detection between the two machines, the passor fail message will appear on the screen.Running PQA Diagnostics ProgramPress →←→←→←→← to move around the main menu. Press Enter to enable the selected option. The main options areDiag, Result, SysInfo, Option and Exit.The Diag option lets you select testing items and times.The following screen appears when you select Diag from the main menu.PQA Vx_x xx-xx-xxDiag Result SysInfo Option Exit