Appendix B Notices76controls may result in damage and will often require extensive workby a qualified technician to restore the product to normal condition.e If the product has been dropped or the cabinet has been damagedf If the product exhibits a distinct change in performance, indicating aneed for service.12 Replace the battery with the same type as the product's battery werecommend. Use of another battery may present a risk of fire or explosion.13 Warning! Batteries may explode if not handled properly. Do notdisassemble or dispose of them in fire. Keep them away from children anddispose of used batteries promptly.14 Use only the proper type of power supply cord set (provided in youraccessories box) for this unit. It should be a detachable type: UL listed/CSAcertified, type SPT-2, rated 7A 125V minimum, VDE approved or itsequivalent. Maximum length is 15 feet (4.6 meters).Regulatory InformationThe WM3B2100 Wireless LAN Card must be installed and used in strictaccordance with the manufacturer’s instructions. This device complies with thefollowing radio frequency and safety standards.Canada - Industry Canada (IC)• This device complies with RSS 210 of Industry Canada.Europe - EU Declaration of ConformityThis device complies with the specifications listed below, following theprovisions of the EMC Directive 89/336/EEC:• ETS 300-826• ETS 300-328 Technical requirements for Radio equipment.USA - Federal Communications Commission (FCC)This device complies with Part 15 of FCC Rules. Operation of the devices in anWM3B2100 Wireless LAN System is subject to the following two conditions:• This device may not cause harmful interference.• This device must accept any interference that may cause undesiredoperation.Exposure to Radio Frequency RadiationThe radiated output power of the WM3B2100 Wireless LAN Card is far belowthe FCC radio frequency exposure limits. Nevertheless, the WM3B2100 Wireless