Acer V55LA-2 User Manual

Also see for V55LA-2: Safety instructions

Contents

Acer V55LA-2 User Manual Manual pdf 15 page image

System Board1-151.4.3 Reconfiguring the SystemYou must enter Setup after installing or removing SIMMs toreconfigure the system.Follow these steps to reconfigure the system:1. Turn the system on. A memory error message appears,indicating that the total memory does not match the value storedin CMOS.2. Press + + to enter Setup. A warning messageappears indicating an incorrect memory configuration.3. Press twice to exit and reboot the system.The system boots with the new memory configuration.1.5 IDE Hard Disk SupportThe system board supports four IDE hard disks, or any other IDEdevices, through the two onboard PCI IDE interfaces. See Figure 1-1for the location.Follow the instructions in the housing installation manual on how toinstall a hard disk in the system. Connect the cables according to theIDE hard disk configuration in Table 1-8.Table 1-8 IDE Hard Disk ConfigurationIDE Connector Master SlaveChannel 1 Hard disk 0 Hard disk 1Channel 2 Hard disk 2 Hard disk 3