Acer VT2800-U-P5210 User Manual

Also see for Veriton 2800 series: User guide Guía del usuario

Contents

41To reconfigure your computerYour computer automatically detects the amount of memory installed. Run theBIOS utility to view the new value for total system memory and make a noteof it.Replacing the Veriton 2800's hard diskFollow these steps to replace your computer's hard disk:1 Remove the computer cover.2 Detach all cables connected to the optical disk and hard disk. Remove theoptical disk and attached hard disk carrier.3 Remove the screws that hold the hard disk into the carrier.4 Insert the new hard disk into the carrier and secure it with the screws.5 Replace the optical disk and hard disk, and reattach all cables to the newhard disk.Note: Make sure that the other ends of the disk cables are securelyconnected to their corresponding connectors on the mainboard.6 Reinstall the metal bracket frame to the housing.7 Replace the computer cover.Installing an expansion cardNote: To install a PCI or PCI Express card, you will need to use ariser card. Only one card can be installed at any time.Note: The type of riser card you need will depend on whetheryou're installing a PCI or PCI Express expansion card. Standard PCIcards will require a riser card that is in two parts, as shown below.To install an expansion card:1 Remove the computer cover.2 Locate the empty PCI Express or PCI slot on the mainboard.3 Remove the screw that holds the bracket to the computer, and put toone side.