49 Veriton 3600(D/G)/5600(D/G)/7600(D/G)PnP/PCI ConfigurationsThe table below describes each PnP/PCI configuration parameter. Settings in boldface are the default andsuggested settings.Parameter Description OptionsReset Configuration Data Select Enabled to reset Extended SystemConfiguration Data (ESCD) when you exit Setupif you have installed a new add-on and thesystem configuration has caused such a seriousconflict that the OS cannot boot.DisabledEnabledResources Controlled By Setting this option to Manual allows you toindividually assign the IRQs and DMAs to theISA and PCI devices. Set this to Auto to enablethe auto-configuration function.Auto (ESCD)ManualIRQ ResourcesIRQ 3 (COM2)IRQ 4 (COM1)IRQ 5 (Network/Sound orOthers)IRQ 7 (Printer or Others)IRQ 9 (Video or Others)IRQ 10 (SCSI or Others)IRQ 11 (SCSI or Others)IRQ 12 (PS/2 Mouse)IRQ 14 (IDE1)IRQ15 (IDE2)Set “ Resources Controlled By” to Manual toshow the IRQ Resources.If your ISA card is not PnP compatible andrequires a special IRQ to support its function, setthe selected IRQ to Legacy ISA. This settinginforms the PnP BIOS to reserve the selectedIRQ for the installed legacy ISA card. The defaultis PCI/ISA PnP. Take note that PCI cards arealways PnP compatible (except old PCI IDEcards).PCI/ISA PnPLegacy ISA
