Chapter 2 20Power Management SetupParameter Description OptionACPI Aware O/S This item supports ACPI (Advanced Configuration and Powermanagement Interface).Usethis item to enable or disable the ACPIfeature.YESNoACPI Suspend Mode Select an ACPI state. S3 (STR)S1 (POS)Deep Power Off Mode If Enabled, it will support EUP Lot6 Function.If Disabled, it will not support EUP Lot6Function.EnabledDisabledPower On by RTC Alarm Enables or Disables to wake up the system by RTC Alarm Function EnabledDisabledPower On by PCIE Devices Enables or disables to wake up the system from a power saving modethrough an event on PCI Express device.EnabledDisabledPower On by PCI Devices The system can be turned off with a software command. If you enablethis item, the systemcan automatically resume if there is an incomingcall on the PCI. You must use an ATXpower supply in order to use thisfeature. Use this item to do wake-up action if inserting thePCI.EnabledDisabledPower On by Modem Ring This system can be turned off with a software command. If you enablethis item, the systemcan automatically resume if there is an incomingcall on the Modem. You must use an ATXpower supply in order to usethis feature.DisabledEnabledWake Up by PS/2 KB/MouseEnables or disables to wake up the system from a power saving modeusing a PS2 keyboard or mouse.EnabledDisabledWake Up by USB KB/MouseIf enabled, press any key or click the mouse will wake system from S1/S3 state.EnabledDisabledRestore On AC Power Loss Enables or disables the system to reboot after a power failure orinterrupt occurs.Power OffPower OnLast State