Acer Veriton X4618G User Manual
Also see for Veriton X2610G: Service guide
                                      | |
Contents
| 
7EnglishPositioning your mouse• The mouse should be placed on the same surface as your keyboard so thatyou can reach it with ease.• Adjust its position to allow enough space for movement without makingyou stretch or lean over.• Use your arm to move the mouse. Do not rest your wrist on the table whenmoving the mouse.Connecting peripheralsSetting up your computer is easy. For the most part, you only have four thingsto connect: the mouse, keyboard, monitor and power cable.Note: The peripherals shown in the connections below arefor your reference only. Actual device models may vary inselect countries.Connecting your mouse and keyboardUSB interfacePlug your USB mouse or keyboard cable into any of the USB ports locatedon the front and rear panels of your computer.PS/2 interfacePlug the PS/2 keyboard cable into the PS/2 keyboard (purple) port on the rearpanel of your computer. Plug the PS/2 mouse cable into the PS/2 mouse (green)port on the rear panel of your computer.Connecting a monitorTo connect a monitor, simply plug the monitor cable into the monitor (blue)port on the rear panel of your computer .Note: When a VGA card is added to the PCI Express slot, themonitor should be connected to the add-on card and theonboard VGA will be disabled. |
Related manuals for Acer Veriton X2610G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine