Acer X1200 ED5200A - Aspire Service Manual

Contents

18 Chapter 2Integrated PeripheralsParameter Description OptionIDE Function Setup Press Enter to access the IDE Function Setup submenu.MCP Storage Config Press Enter to access the MCP Storage Config submenu.Init Display First Select whether to boot the system using the AGP graphic card or a PCIcard installed on the PCI Express slot or PCI slot.PCIExPCI SlotOnboardHD Audio Enables or disables the onboard audio controller. AutoDisabledHDMI Audio Allows you to control the audio function of the onboard HDMI. DisabledAutoMAC LAN Enables or disables the built-in network interface card. AutoDisabledIDE HDD Block Mode When enabled, the BIOS will automatically detect if your hard disksupports block transfers and set the proper block transfer settings for it.Depending on the IDE controller, up to 64 KB of data can be transferredper interrupt when block transfers are enabled.When disabled, only 512 bytes of data can be transferred per interrupt.EnabledDisabledOnboard Serial Port 1 Select the I/O address and IRQ for the first serial port. 3F8/IRQ42F8/IRQ33E8/IRQ42E8/IRQ3AutoDisabledOnboard Parallel Port Select the I/O address and IRQ for the onboard parallel port. 378/IRQ7278/IRQ53BC/IRQ7DisabledParallel Port Mode Select an operating mode for the onboard parallel port. SPPEPPECPECP+EPPECPM Mode Use DMA Select DMA channel for the LPT port in ECP mode. This parameter canbe configured if the parallel port mode is set to ECP or ECP +EPPmode.31USB Device Setting Press Enter to access the USB Device Setting submenu.