Acer X1525C User Manual

Also see for AF550B: User guide User guide User guide

Acer X1525C User Manual Manual pdf 42 page image

32English Replacing the LampUse a screwdriver to remove the screw(s) from the cover, and then pull out thelamp. Make sure the projector has been cooling down for at least 45 minutesbefore changing the lamp.Warning: The lamp compartment is hot! Allow it to cool downbefore changing the lamp.To Change the LampTurn off the projector by pressing the Power button.Allow the projector at least 45 minutes to cool down.Disconnect the power cord.1 Remove the screw (a) and slide thelamp cover (b) for removal.2 Disconnect the lamp connector (c).3 Remove the screw (d) that securethe lamp module.Pull out the lamp module (e) bythe handle (f).To replace the lamp module, use a newlamp and reverse the above steps.Warning: To reduce the risk of personal injury, do not drop thelamp module or touch the lamp bulb. The bulb may shatter andcause injury if it is dropped.(a)(b)(f)(e)(c)(d)