9 Getting connectedConnecting to a network697 In the General tab you can set the network name (also known as SSID); this is onlyeditable if you are creating a new wireless network profile else you are viewing apreferred network and the SSID has already been established. Indicate whether thisnetwork will connect you to The Internet. Finally, if this is a new network profile,you can indicate whether this is a computer-to-computer network.NOTE: To determine if authentication is needed, check your network administrator.8 To view your wireless network connection after the preceding steps have beenfollowed, press the icon in the notification area. A green status indicator willshow how strong your signal is. Tapping Turn Wireless Off will turn off your networkcard radio. Pressing the icon will then allow you to Turn Wireless on.Once your network card has been configured, you will immediately be connected.Connecting to a networkIf you have access to a network at work, you can send email messages, view Intranetpages, synchronise your handheld, and access the Internet. You can connect to anetwork in one of three ways:• Create a modem connection by using an RAS account.• Use an wireless Ethernet card and a net tap to connect to the network.If this is the method you want to use, see "To create an wireless Ethernetconnection to a network" on page 69.Your n30 handheld supports a SD wireless Ethernet card or a SD Modem card.• Create a Bluetooth connection to a cellular phone as a modem withBluetooth support.NOTE: Bluetooth is available only for n30-B.To create a modem connection to a networkFollow the instructions stated in "To create a modem connection to an ISP" section,but select Add a new modem connection under My Work Network to begin.To create a wireless Ethernet connection to a networkFollow the instructions stated in "To create a wireless Ethernet connection to an ISP"section, but connect to Work under notification bubble to begin.To create a connection to a network over BluetoothFollow the instructions stated in "To create a conection to an ISP over Blouetooth”section, but Add a new modem connection from work under connection tab.