21F2=F3=F4=F5=F6=F7=F8=F9=Songs can be assigned to a keyboard’s F1-F9 keys. SeePage 15 for more details regarding keyboard use withthe KOD-1000.System Setup: Disc ModeWhile your KOD-1000 is a very capable disc player,the menus below will add more functionality and en-joyment to your music-listening and movie-watchingexperience.To access the DISC Setup Mode:1. Press the EJECT button on the KOD-1000’sfront panel to eject the disc tray.2. Press SETUP on the remote to access the DISCSSetup Mode.Alternatively, press the SETUP button while a disc isplaying in the KOD-1000’s tray.SYSTEM SETUPTV System1. Press Direction KEY [▲▼] to choose TV SYS-TEM.2. Press Direction KEY [▶] to show SUB-MENU.3. Press Direction KEY [▲▼] to select the TVsystem [NTSC/ PAL/PAL 60/AUTO].4. Press [OK] to confirm it.NOTE: Most North American televisions are NTSC.Screen Saver1, Press Direction KEY [▲▼] to choose SCREENSAVER.2, Press Direction KEY [▶] to show SUB-MENU.3, Press Direction KEY [▲▼] for ON or OFF.4. Press [OK] to confirm it.NOTE: The screen will change to Screen Saver modeif the player is idle for 20 minutes.Video1. Press Direction KEY [▲▼] to choose VIDEO.2. Press Direction KEY [▶] to show SUB-MENU.3. Press Direction KEY [▲▼] to select VIDEOOUTPUT MODE.4. Press [OK] to confirm it.NOTE: Output modes available are YUV/TV, TV/RGB, P-SCAN YPBPR, PC-VGA and S-VIDEO.TV Type1. Press Direction KEY [▲▼] to choose TVTYPE.2. Press Direction KEY [▶] to show SUB-Menu.3. Press Direction KEY [▲▼] to select the type.4. Press [OK] to confirm it.NOTE: Options are 4:3PS (4:3 pan and scan), 4:3LB(4:3 letterbox) or 16:9. Non-high definition screensare 4:3. High definition screens are 16:9.Password1. Press Direction KEY [▲▼] to choose PASS-WORD.2. Press Direction KEY [▶] to show SUB-MENU.3. Press the Numeric KEY to input new password ifnecessary.4. Press [OK] to confirm it.NOTE: The password should be four numbers. Thedefault password is 0000.Rating1. Press Direction KEY [▲▼] to choose RATING.2. Press Direction KEY [▲▼] for SUB-MENU.3. Press Direction KEY [▲▼] to select the RAT-ING, if necessary.4. Press [OK] to confirm it.