E. Remove the machine from the rest of thepackaging.When moving the machine, hold the bottom andthe build platform guideway. Be careful not to putyour fingers on the vat while moving. Keep themachine vertical, without tilting it backward, so asto not bend or displace critical components.F. The vat film package is taped to the front of thehood. Remove that package from the hood,and store it in a safe place.Do not bend vat film or touch the film directlywith your hands while moving it.G. Put the hood back on the printer. You mayremove the plastic wrap or leave it on.H. Remove and store the contents of the 4accessory boxes.CABLE: 1 Ethernet cableand 1 power cableTOOLS: 1 Hex keyPANEL: 2 LCD panels,packaged in bubble wrapOne box is unmarked,and is usually empty.ToolsCable PanelEmptybox2. What you needBeyond the printer, you need several other items in order to make a complete print and use your printer effectively.This section outlines the items that you need to acquire in addition to the items shipped with the printer.A. ComputerIn order to run the Alpha 3D or Omega 3D print software, you will need a computer that meets the followingminimum requirements.FreeShape 120 Manual06