Acnodes PC 2150 User Manual

Also see for PC 2150: Specifications

Contents

Acnodes PC 2150 User Manual Manual pdf 20 page image

PC 2150 15.0” All-in-One PANEL PC User’s ManualSystem Installation143.2 FDD InstallationWhen upgrading the CD-ROM or FDD, refer to the followingillustration and instructions:1. Remove the 3 screws securing the riser card assembly’sback cover. Take off the cover by sliding it outward andpulling it upwards as pointed by the arrows. If yoursystem does not come with a riser card assembly, proceedto step 2.2. Another 6 screws, located on the upper perimeter (3) andlower half (3), needs to be removed. These screws are thescrews bolting the system’s rear cover to the main unit.3. You may now take off the system’s rear cover (along withthe riser card assembly).4. See the illustration for the exact locations of yourCD-ROM and FDD slots. There are 2 screws mounted onthe cover of each slot. Remove these screws. Store thecovers at a safe place for future use.5. Mount the FDD and CD-ROM drives as shown on theillustration. Make sure to secure the drives using all 8screws located on both sides of the expansion bay.6. After completing the installation, restore the system backto its original form by following instructions 3 to 1.