3.7.2 User PasswordType the password with up to 20 characters and then press Enter key. This willclear all previously typed CMOS passwords. You will be requested to confirm thepassword. Type the password again and press Enter key. You may press Esckey to abandon password entry operation.To clear the password, just press Enter key when password input window pops up.A confirmation message will be shown on the screen as to whether the password willbe disabled. You will have direct access to BIOS setup without typing any passwordafter system reboot once the password is disabled.Once the password feature is used, you will be requested to type the password eachtime you enter BIOS setup. This will prevent unauthorized persons from changingyour system configurations.Also, the feature is capable of requesting users to enter the password prior to systemboot to control unauthorized access to your computer. Users may enable the featurein Security Option of Advanced BIOS Features. If Security Option is set to System,you will be requested to enter the password before system boot and when enteringBIOS setup; if Security Option is set to Setup, you will be requested for password forentering BIOS setup.3.8 Save & Exit SettingsAptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.Main Advanced Chipset Boot Security Save & ExitSave Changes and ExitDiscard Changes and ExitSave Changes and ResetDiscard Changes and ResetSave OptionsSave ChangesDiscard ChangesExit system setup afterSaving the changes.