Acom LS-100 Owner's Manual

Also see for LS-100: Owner's manual

Acom LS-100 Owner's Manual Manual pdf 42 page image

384. If the PLU you selected is By Weight then go to step 6. The UnitPrice and Total Price displays will show the current Piece countof the selected By Count PLU.5. You can type a new Piece count and press PRINT to store thenew Piece count and go to step 6 or press ESC ESCSET to go back to the Initial State.6. The Unit Price and Total Price displays will show the currentprice of the selected PLU.7. You can type a new price and go to step 8 or press ESCESC SET to go back to the Initial State.8. The Total Price Display will show the new price while the UnitPrice Display continues to show the current price. Press PRINTto store the new price and go to step 3.Deleting PLUsThe LS-100 can store up to 1000 PLU. Although this is enough formost applications, there may come a time that you might want todelete some PLUs to remove unused or erroneous PLUs. You canonly delete 1 PLU at a time. To delete ALL PLUs see AdvancedProgramming, Deleting All PLUs section.To Delete PLUs:1. Follow steps 1 to 3 of entering Main Menu.2. Press 8 7 .3. Enter a PLU number to delete and press PRINT .4. If you are done, press ESC SET ; otherwise, press 7and go back to step 3.When finished, the scale will be in the Initial State.