Configuring Front-End ServicesShowing Server Maps11-48 CLI Storage-Management Guidevol0/corp 192.168.25.21:/vol/vol0/direct/shrvol0/notes 192.168.25.21:/vol/vol0/direct/notes...bstnA6k(gbl)# ...Showing the Servers Behind One Virtual ServerTo focus on one virtual server, add its VIP to the end of the command:show server-mapping virtual-ip vip [ip-addresses]wherevip identifies the VIP (for example, 172.16.77.75), andip-addresses (optional) is explained above.For example, the following command shows the filers behind “192.168.25.15.” ThisVIP has multiple exports (described in the next chapter), and every export draws fromthe same set of filers:bstnA6k(gbl)# show server-mapping virtual-ip 192.168.25.15Virtual Server Namespace/VolumeVirtual Path Physical Server-----------------------------------------------------------------------\\192.168.25.15\ARCHIVES medarcv:/rcrds\\fs1\histories\\fs2\bulkstorage\\fs4\prescriptionsnas1:/vol/vol1/meta3*\\192.168.25.15\CELEBS medarcv:/rcrds\\fs1\histories\\fs2\bulkstorage\\fs4\prescriptionsnas1:/vol/vol1/meta3*
