Acoustic Energy Aegis Neo Owner's Manual
        | |
Page Diagram OneThe Aegis Neo Subwoofer requires connection both to mains power and anappropriate audio signal. The connection sockets are located on the back panelillustrated opposite in Diagram Two. Leave the subwoofer switched-off at themains until all connections are made and ensure that the Volume Level control,also located on the back panel, is turned fully anti-clockwise. Connecting yourAegis Neo Subwoofer to an audio signal is a simple process, however, there aresome choices to be made concerning connection mode.Signal Input ConnectionsAegis Neo Subwoofer is fitted with an unfiltered mono AV Subwoofer Line Inputand a standard stereo pair of filtered Line Inputs.The AV Subwoofer Line Input is intended for connection to an audio-visualprocessor LFE (low frequency effects) output. As the LFE output of audio-visualprocessors is already low-pass filtered, the subwoofer’s crossover filter is bypassedby the AV Subwoofer Line Input. The Crossover Frequency control has no effect onsignals connected to the AV Subwoofer Line Input.The stereo Line Inputs are intended for connection to preamplifier or other similarline outputs. The left and right inputs are combined to mono within the subwoofer.Connect to the input sockets using an appropriate RCA Phono connection cable.Ensure that the cable is of good quality.Signal Output ConnectionsRCA Phono Line Level signal output sockets are fitted to the Aegis Neo Subwoofer.They carry an output signal identical to the input signal and may be used totransfer the signal back to a power amplifier or to connect multiple subwoofers.Mains ConnectionAfter checking that the mains voltage specified onthe subwoofer rear panel is set correctly, connectthe subwoofer via its IEC mains input to a mains wallsocket. Use only the mains cable supplied with thesubwoofer.LeftFrontViewing/listening positionRightFrontCentreLeftSurroundRightSurroundAlternativeor Extra LeftSurroundAlternative orExtra RightSurroundSub-woofer5. ConnectingVOLUMELEVELCROSSOVERFREQUENCYPHASENOTCHFREQUENCYNOTCHSLOPENOTCHLEVELPOWERATTENTIONRisque du choc electrNe pas ouveré.CAUTIONRisk of electric shocDo not open.No user serviceable parts inside.Consult Owners Manual before use.Operate in accordance withManufacturer’s instructions.If in doubt refer to qualified service personnel.Not suitable for wall mounting.POWER INPUT120/240V 50/60HZFUSE230-240V : T1.6AL 250V115-120V : T3.15AL 250VOFF ONAUTOAV SUBWOOFER LINE-INLINE IN RIGHTLINE OUT RIGHTLINE IN LEFTLINE OUT LEFTMAINSVOLTAGESELECTORMIN MAX 40Hz 100Hz55Hz 85Hz70HzMIN MAX0dB -12dB-3dB -9dB-6dB45Hz 150Hz75Hz 135Hz105Hz0° 180°45° 135°90°Designed and EngineeAcoustic Energey Ltd.,Made in MalaysS U B W O O F E200 Watt Active SubwSerial NumberDiagram Two |
Related manuals for Acoustic Energy Aegis Neo
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine