Acoustic Image Ten2 Owner's Manual
Also see for Clarus: Owner's manual
          | |
Contents | 
System (all models)Amp HeadFrequency Response 30 Hz-18 kHz (40-14 kHz ±3 dB)50 Hz- kHz (60-1 kHz ) CorusMax SPL >112 dB at 1 meter,(Corus), >118 dB/m (Ten2)AC Power 100-115V/50/60 Hz or 220-240V/50 Hz,switchable,Size 12”Hx15”Wx13”D (Coda, Corus, EX)Weight 22 lbs (Coda, Corus, 19 lbs (EX)32 lbs (Ten2), 25 lbs (EX)4 lbs (Clarus)Frequency Response 20 Hz - 20 kHz (Mic Input 600 ohm balanced, XLR connector,switchable 10 dB padPhantom Power 48 volts, on/off switch w/LED indicatorInstrument Input 1 M impedance, 1/4 inch jackDirect Out +4 dB, balanced, XLR connector, groundlift, pre/post EQ selectorEffects Loop Parallel type with return level controlBass Control Shelving type, ±15 dB at 60 HzMid Control ±15 dB at 650 HzTreble Control Shelving type, ±15 dB at 10 kHzLow Cut Filter -12 dB/octave sweepable from 30 to 400HzPhase Reverse Switchable 180 degree phase reverseType Digital with 6 presets and level controlProgram Presets 3 reverb (hall, room, plate), delay,ambient chorus, flangeTopology Class D (PWM)Switching Frequency 500 kHzOutput Power 8 300W rms continuous, 350W rms music,500W peak transientExternal Speaker Output Neutrik Speakon type (pole 1), 2 minload including internal speakers, ifconnected18 4 ±3 dB>115 dB at 1 meter17”Hx15”Wx13”D (Ten2), 14”H (EX)10”x8”x3.5” (Clarus)±0.5 dB)Output Power 4 500W rms continuous, 650W rms music,1000W peak transientPreamp (Mic and Instrument Inputs through combo jack)EffectsPower AmpWWWW14SpecificationsSpeaker System (Coda, Corus)Speaker System (Ten2)Shoulder StrapWoofer 10 inch, downfiringMidrange 5 inch, forward firing with 2 position levelcontrol switchCrossover Passive, alignment correctedImpedance 8Power rating 250WWoofer Dual 10 inch, one downfiring with levelcontrol, one forward firingTweeter 2.5 inch forward firing with attenuationcontrolCrossover Passive, alignment correctedImpedance 4Power rating 500WFitted slip cover with cord storagepocket and shoulder strap (comboamps)Gig bag with shoulder strap, Speakonto 1/4 inch adapter (amp heads)Padded gig bag with shoulder strapmade by Mooradian, kit to convertcabinet with head removed to anextension cab (adapter, filler panel,padded case for head)To use the shoulder strap to transport a combo amp, feed the strapthrough the handle opening on the speaker cabinet (both sides) andclip the end to the D-ring attached to the strap. The picture belowillustrates how to attach the strap. The strap can be used either withthe slip cover in place or not in place.WWSupplied AccessoriesAvailable Accessories15 |
manualsdatabase
Your AI-powered manual search engine