Acoustic Preference GRACIO 2.0 Owner's Manual
              | |
Page - 85. CONNECTIONSTurn off all audio system power before making any connections.Use high-quality loudspeaker cables. The length and type of speaker cable used for yoursystem will have an audible effect.Make all connections observing the proper polarity, positive-to-positive (+) and negative-to-negative (–).Most speaker cables are marked so that it is possible to distinguish between conductors bythe colour of the insulation or by a white stripe or small raised edge along one conductor. Correctphasing of the speakers is vital for sound quality.Connecting your Gracioso 2.0 loudspeakers1. Connect one pair of loudspeaker wires to the input connectors. Then connect the same pair ofloudspeaker wires to the desired power amplifier output channel.2. Repeat step 1 to connect the second loudspeaker to a separate power amplifier output channel.Figure 5: Connection with single stereo amplifier |
Related manuals for Acoustic Preference GRACIO 2.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine