Acoustic Research ARIRC600i Quick Start Manual

Also see for ARIRC600i: User manual

Acoustic Research ARIRC600i Quick Start Manual Manual pdf 1 page image

A. NOTE: When you turn on the radio for the first time, it willbe in “DEMO” mode. To exit this mode, press and releasepreset 1, then SLEEP, then preset 6 on top of the radio.B. After exiting the DEMO mode, theradio displays the Select Languagescreen. Choose your preferredlanguage.C. The Network Setup screen displaysconnection options:• Select Wired to connect using anEthernet cable and proceed to stepD.OR• Select Wireless, then choose from setup optionsdisplayed:– Detect Networks allows you to search for availablenetworks, then choose your network.– Enter SSID allows you to manually enter a knownnetwork name (SSID). See tips to the right.– If the network is secure, select security type and/or enteryour password in the Network Security screen.D. The radio should now connect to the Internet. If the radiodoes not connect refer to the troubleshooting section inyour user manual.After connecting to the Internet• If you did not activate your InfiniteRadio accounts, or if the radiocannot get your details from theInfinite Radio server, the radio mayask for your postal code. Input yourcode.• If your radio has successfully connected to the Internetyou will hear a welcome message.ARIRC600iQuickStartGuideCongratulations on purchasing your new Acoustic Research Wi-Fi Internet Radio.Please follow these instructions to set up and start using the radio.www.arinfiniteradio.comUnpack the unitYou should find the following items in the box:Additional requirements:• Broadband Internet service• Broadband (cable/DSL) modem, usually supplied by your Internet service provider• An 802.11 b or g (Wi-Fi) wireless home network or Ethernet router/switch/hub with available LANportFor Wi-Fi connections, you may also need:• Your wireless network’s SSID• Your access password (for secure networks)Setup your AR Infinite Radio accountsTo simplify setup on the radio please complete these steps:A. Find the Setup Information Card that contains your radio’s MAC address number (MAC: 00-21-2A-XX-XX-XX) and activation PIN # (PIN: 0000). (This number is also found in the Device Info screenunder the Settings menu in your radio or on the sticker located on the back of the radio.)B. Using any Internet-connected computer, go to www.arinfiniteradio.com/setup and follow theonline instructions.• You will need to input your radio’s MAC address and PIN # to associate your radio with yourpersonal settings.RadioSetupInformationCardEthernet cableQuick StartGuide (thisleaflet)!User Manual12v1.0 (EN)Optional: For use with a “Wired” connectionPlug in and turn on the radioUse the supplied Ethernet cable if you do not have a wireless (Wi-Fi) access point.Electrical outletPress and release preset 1, thenSLEEP, then preset 6.Exit the DEMO mode afterturning on43 5 Set up the radioAbout passphrase:• This radio supports securedaccess points using the WirelessEquivalent Privacy (WEP) keys orWi-Fi Protected Access (WPA andWPA2) standards.• WEP keys are either 10 or 26characters long (e.g. 6E78214A52).Note that some Wi-Fi routerssupport passphrase generationfor WEP security. However, thereis no industry standard for WEPpassphrase generation andthis radio does not support WEPpassphrases.• If you are using a WEP securedaccess point, enter the WEPkey (HEX format) instead of thepassphrase.Remote control* AM loop antennaLANLANLANBroadband modem orEthernet router/hub/switchUse the navigation controls to makechoices and input information:− move highlight up– move highlight down/ – move selection/navigate left/ – move selection/navigate rightSELECT - confirm selected option orcharacterWhen inputting characters, pressor to choose among uppercase,lowercase, numeric, or specialcharacters.To insert spaces or correct mistakes,press to display the Commands listand then press or (or / ) tochoose the desired command.Radio Remote controlPress or to highlight,SELECT to confirm.Press to show “DONE”and SELECT to confirm.Learn more about your Internet RadioRead the user manual for more information on the player’s features, safety and warrantyinformation, and answers to Frequently Asked Questions (FAQ’s).Need more help? Do not return this product to the store.Visit www.arinfiniteradio.com to get the latest firmware updates and FAQ’s.To Exit DEMO mode press and release preset 1,then SLEEP, then preset 6.*The remote control must be inserted with 2 “AAA” batteries (not included) prior to use.

/ 2

Related manuals for Acoustic Research ARIRC600i