Acoustic Research ARRS05G User Manual

Acoustic Research ARRS05G User Manual Manual pdf 6 page image

6You can program the remote’s device keys for the following kinds ofdevices:TV TelevisionDVD/VCR DVD player, video recorderCBL/SAT (DTC) Cable box, satellite receiver, ordigital TV converterAudio Amplifier, amp/tunerAux Video accessory device, digitalTV converterTo reassign a device key to control a different kind of device (asecond TV, for example), see page 11.Code SearchThe code search allows you to scan through all the codes containedin the remote’s memory. If your device does not respond to thisremote after you have tried all the codes listed for your brand (orif your brand is not listed in the code list), use the code search toprogram the remote.To search for your device’s code:1. Make sure your device is on (not in standby mode).2. Press the device key on this remote forthe device you want to operate.3. Press and hold SET until the device keyblinks twice (the red indicator blinksonce, then twice).4. Press 9 9 1. The device key blinks twice.5. Press POWER.6. Aim the remote at the device you wantto control. Press CH+ over and over,until your device turns off (every timeyou press the CH+ key remote sendsout a POWER signal from the next codecontained in the memory). You mayhave to press this key many times (up to150 times) so you’ll need to be patient. Ifyou skip past a code, you can go to theprevious code(s) by pressing the CH–key. Remember to keep pointing theremote at your device while pressingthis key.7. As soon as your device turns off, pressand hold SET until the device keyblinks twice to store the code (the redindicator blinks twice).