Acoustic Research ARW51 Installation And Operation Manual
Also see for ARW20: Specifications
                        | |
13INSTALLING THE RECEIVERInstalling Receiver and BracketConnect the receiver to the bracket as shown below. First place the rear "hook" over thesmall lip on the back of the receiver with the receiver angled up in the front, then pressdown lightly on the front of the receiver. The receiver will snap into place and may beremoved if desired.Installing the ARWR2 Receiver with Amplifier1. CONNECTING TO THE SPEAKERConnect a 2 conductor speaker cable (not included) from the Speaker Out on thereceiver to the speaker. Use the red cable to connect the “+” (plus) and connect thethe other end to the black terminals marked “-” (minus). Pay careful attention to wirepolarity at the receiver and at the speaker.2. CONNECTING POWERInsert the DC 26V/2.5A AC-DC Adaptor plug into the DC In Jack located on theback of the ARWR2 Receiver with Amplifier. Plug the other end of the AC-DC Adap-tor into a conveniently located electrical wall outlet.RECEIVERBRACKETSPEAKERARWR2 RECEIVER WITH AMPLIFIERDC IN JACKSPEAKER OUTDC 26V ADAPTOR |
Related manuals for Acoustic Research ARW20
manualsdatabase
Your AI-powered manual search engine