Acoustic Research AWD205 Owner's Manual

Contents

Acoustic Research AWD205 Owner's Manual Manual pdf 4 page image

GettInG Started4Supplied AccessoriesThis headphone system includes accessories that enable you to useyour wireless headphone set in a number of ways.AC power adapterHeadphonecharging cableWireless headphones2.4GHz wirelesstransmitter2 AAA rechargeable batteriesInstalling the Headphone Batteries1. Twist the left headphone’s earpad cover counter-clockwise toexpose the battery compartment.2. Insert the two (2) rechargeable AAA batteries (included) in theleft headphone, following the polarity (+ and –) diagram inside thecompartment.3. Place the earpad back on the left headphone and twist it clockwiseto lock it back into place.Important: DO NOT mix batteries with different chemistry types (for example, a zincbattery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leavebatteries installed in the product when not in use for long periods. Always remove old,weak or worn-out batteries promptly and recycle or dispose of them in accordance withlocal and national regulations.Important: If you are using rechargeable batteries NiMH or NiCd (such as thebatteries provided), the batteries will charge when the headphones are connectedto the transmitter using the charging cable. DO NOT connect the headphones to thetransmitter with the charging cable if you installed alkaline or other non-rechargeablebatteries – this could cause the batteries to leak, which would damage the headphones.