ULTRASONIC THICKNESS GAUGE - A1207 (A1207C)Acoustic Control Systems, Ltd.Moscow, 200622|After that leave the velocity choice button.On the display you will see horizontal strokes. In1-2 seconds they should blink, and that will meanthat the device is ready for work.7.3. REPLACEMENT OF THE PROBE’S CAPSULEWhen the probe’s capsule is worn out it is possible to replace it. For that, do the followingactions:{Unstick the nameplate from the rear side of thedevice.|Loose two screws that fasten two parts of thecase.}Take the front panel of the case off.

GENERAL INFORMATION

DESCRIPTION

DELIVERY SET

DEVICE OPERATION

MEASUREMENTS AND ADJUSTMENT OF DEVICE

ADDITIONAL ADJUSTMENTS OF THE DEVICE

ADJUSMENTS ON THE KNOWN VELOCITY IN TESTIND MATERIAL

VELOCITY IN TESTING MATERIAL WITH THE KNOW THICKNESS

SET OF THE LOW THICKNESS LIMIT

TECHNICAL SPECIFICATION

PRINCIPLES OF OPERATION

SOME NOTES ON OPERATION

MAINTENANCE WORKS

REPLACEMENT OF THE PROBE'S CAPSULE

WARRANTY

CE-STANDARDS CONFORMANCE

ATTACHMENT

Acoustic control systems A1207 Operation Manual

A1207

A1207C