AcousticSheep SleepPhones Classic User Manual
  |
/SleepPhones® and RunPhones® Classic(Wired Headphones)HeadbandSpeakers and CordSLEEPPHONES® OR RUNPHONES® CLASSIC/ /WEARING YOUR CLASSIC HEADPHONESPlease Note: The speakers move inside of the headband,independently of the headband.Holding the headband, you’ll notice the flatspeakers – one on each side – inside of theheadband.Place the headband on your head (tag towardsthe back).Once the headband is on, adjust the speakersso they are positioned directly over your ears.This will ensure the best sound quality.123RL3.5 mmWASHING INSTRUCTIONSOpen the hook and loop at theback of the headband to revealthe speaker components insidethe headband.Reach in to remove thespeakers, one at a time,from the headband.Once the speakers areremoved, you can machine-wash the headband.Reinsert one speaker at a time,and move each about four inches fromthe hook and loop opening on either sideof the headband.• Right speaker has red stitching• Left speaker has green stitching• Softer gray side should face towards the ear• White side should face away from the earClose the hook and loop opening with the cord hangingout so you can connect to your device.12345• When disconnecting the cord, grasp and pull the plugand not the cord.• Do not leave components in a wet or dirty headband.• Wash your headband regularly (remove all componentsbefore washing).• Avoid bending near the plug and keep the cord free oftangles and knots.PROLONG THE LIFE OF YOUR HEADPHONESRLINSTRUCTIONSScan this QR code or visit www.SleepPhones.com/instructionsto read this User Guide as well as Warranty Information andLegal disclosures in additional languages.ANLEITUNGINSTRUCCIONESISTRUZIONIINSTRUÇÕES說明書说明书指示書명령تاميلعت |
Related manuals for AcousticSheep RunPhones Classic
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine