AcousticSheep SleepPhones SB8BM-US User Manual
  |
BASIC WIRELESS HEADPHONE USAGE WASHING INSTRUCTIONSOpen the hook and loop at theback of the headband to revealthe speaker components insidethe headband.Remove the Bluetooth®module and then reach in toremove the speakers, one ata time, from the headband.Once the speakers and moduleare removed, you can machinewash the headband.Reinsert one speaker at a time, and move each one aboutfour inches from the hook and loop opening on either sideof the headband.• Right speaker has red stitching• Left speaker has green stitching• Softer gray side should face towards the ear• White side should face away from the earInsert the Bluetooth® module into the headband and closethe hook and loop opening.123RL45PAIRING YOUR WIRELESS HEADPHONESRemove the Bluetooth® module from the hookand loop opening at the back of the headband.Hold down the squarebutton for 5 secondsuntil you hear“power on”through the speakersfollowed by a“Bluetooth® pairing” and a fastblinking red light. It must bewithin 3 feet (1 meter) of your device.On your device, make sureBluetooth® is turned on. Look for‘ACOUSTICSHEEP’ and select topair. Pairing may take up to 30 seconds.When paired, you will hear “Bluetooth® connected.”1233ft (1m)5sPower Off: Press and hold the middle square button on theBluetooth ® module for 3 seconds until you hear “power off”through the speakersCenter ButtonUp ArrowDown ArrowBluetooth® ModuleWEARING YOUR WIRELESS HEADPHONESPlease Note: The speakersmove inside of the headband,independently of the headband.Holding the headphones, you’ll notice the flat speakers –one on each side – inside of the headband.Place the headband on your head(tag goes at the back).Once the headband is on,adjust the speakers so theyare positioned directly overyour ears. This will ensurethe best sound quality.123• When disconnecting, grasp and pull the plug ratherthan the cord.• Do not leave components in a wet or dirty headband.• Wash your headband regularly (remove all componentsbefore washing).PROLONG THE LIFE OF YOUR HEADPHONES/ / / /Skip Tracks: Double clickthe arrows to skip tracksPlay/Pause: Click the centerbutton once to play or pausePower On: Press and hold thecenter button for 5 secondsVolume: Click the arrows toincrease or decrease the volumeINSTRUCTIONSScan this QR code or visit www.SleepPhones.com/instructionsto read this User Guide as well as Warranty Information andLegal disclosures in additional languages.ANLEITUNGINSTRUCCIONESISTRUZIONIINSTRUÇÕES說明書说明书指示書명령تاميلعتThe module is fully charged when the red light disappears.We recommend charging after every use. Chargingtypically takes up to 3 hours and provides 24 hoursof listening time.BLUETOOTH ® CHARGING INSTRUCTIONS123456Open the hook and loop atthe back of the headband.Remove the Bluetooth ®module by unpluggingit from the speakers.Plug the micro-USB cable(USB symbol facing you)into the micro USB porton the Bluetooth ® module(buttons facing you).Plug the micro-USB cable into anywall adapter or computer USB portthat is 5V and 1000mA – a solid redlight will appear during charging.Please Note: Inserting the cable into the moduleupside down could damage your SleepPhones® orRunPhones ® and they will not charge. |
Related manuals for AcousticSheep SleepPhones SB8BM-US
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine