11. CONTROLLERG12 REMOTE CONTROLLERTemperature Settingx To set the desired roomtemperature, press the button toincrease or decrease the settemperature.x The temperature setting range isfrom 16qC to 30qCx Press both buttons simultaneouslyto toggle the temperature settingbetween qC and qFTurbo Modex Press the TURBO button toachieve the required settemperature in a short time.ON Timer Settingx Press the SET button will activatethe on timer function.x Set the desired on time by pressingthe SET button continuously.x Press the CLR button to cancel theoff timer settingSleep Modex Press the button to activate sleepmode. This function is availableunder COOL, HEAT & AUTOmode.x When it is activated in COOLmode, the set temperature will beincreased 0.5qC after 30mins, 1qCafter 1 hour and 2qC after 2 hours.x When it is activated in HEATmode, the set temperature will bedecreased 1qC after 30mins, 2qCafter 1 hour and 3qC after 2 hours.Personalised Settingx Press and hold the button for 3s toinitiate personalized setting.x Set the individual setting e.g.MODE, SET TEMP or FAN SPEEDand leave for 4s to savex 2 groups of settings are allowed tostored in the handsetFan Speed Selectionx Press the button until the desiredfan speed is achieved.Operating Modex Press the MODE button to selectthe type of operating mode.x For Cooling only unit, the availablemodes are: COOL, DRY & FAN.x For Heatpump unit, the availablemodes are: AUTO, COOL, DRY,FAN & HEAT.OFF Timer Settingx Press the SET button will activatethe off timer function.x Set the desired off time bypressing the SET buttoncontinuously.x Press the CLR button to cancel theoff timer settingAutomatic Air Awingx Press the SWING button to activatethe automatic air swing function.x To distribute the air to a specificdirection, press the SWING buttonand wait until the louver move tothe desired direction and press thebutton once again.On/Off Buttonx Press Once to start the airconditionerx Press again to stop the unitClock Time Settingx Press button + or - to increase ordecrease the clock time.Ionizerx Press the button to activate thenegative Ion function, which willrefresh the indoor air effectively.8