Acson A5WMX 10 GR Manual

Contents

Acson A5WMX 10 GR Manual Manual pdf 20 page image

9. CONTROLLER18G12 REMOTE CONTROLLERTemperature Setting• To set the desired roomtemperature, press the button toincrease or decrease the settemperature.• The temperature setting range isfrom 16°C to 30°C• Press both buttons simultaneouslyto toggle the temperature settingbetween °C and °FTurbo Mode• Press the TURBO button to achievethe required set temperature in ashort time.ON Timer Setting• Press the SET button will activatethe on timer function.• Set the desired on time by pressingthe SET button continuously.• Press the CLR button to cancel theoff timer settingSleep Mode• Press the button to activate sleepmode. This function is availableunder COOL, HEAT & AUTOmode.• When it is activated in COOLmode, the set temperature will beincreased 0.5°C after 30mins, 1°Cafter 1 hour and 2°C after 2 hours.• When it is activated in HEAT mode,the set temperature will bedecreased 1°C after 30mins, 2°Cafter 1 hour and 3°C after 2 hours.Personalised Setting• Press and hold the button for 3s toinitiate personalized setting.• Set the individual setting e.g.MODE, SET TEMP or FAN SPEEDand leave for 4s to save• 2 groups of settings are allowed tostored in the handsetFan Speed Selection• Press the button until the desiredfan speed is achieved.Operating Mode• Press the MODE button to selectthe type of operating mode.• For Cooling only unit, the availablemodes are: COOL, DRY & FAN.• For Heatpump unit, the availablemodes are: AUTO, COOL, DRY,FAN & HEAT.OFF Timer Setting• Press the SET button will activatethe off timer function.• Set the desired off time by pressingthe SET button continuously.• Press the CLR button to cancel theoff timer settingAutomatic Air Awing• Press the SWING button to activatethe automatic air swing function.• To distribute the air to a specificdirection, press the SWING buttonand wait until the louver move tothe desired direction and press thebutton once again.On/Off Button• Press Once to start the airconditioner• Press again to stop the unitClock Time Setting• Press button + or - to increase ordecrease the clock time.Ionizer / Non-Thermal Plasma• Press the button to activate the*Negative Ion / Non-ThermalPlasma function, which will refreshthe indoor air effectively.* Depends on specification.