user manual | Endo dual | J28940 | V1 | 06/2018 | NO69EN080H- The medical device is not designed to operate near a source of ionising radiation.- do not insert metallic objects into the medical device to avoid any risk of electric shock, short circuit or the emission ofhazardous substances.maintenance:before and after each use, it is imperative to disinfect your medical device with products recommended by themanufacturer.before each intervention, it is imperative to use cleaned and disinfected accessories.accessories:The medical device only accepts accessories designed by the manufacturer, and only for the use for which they wereintended.The use of accessories from another source could put you or your patients at risk.Repair:Do not carry out any repairs or modifications of the medical device without prior authorization from the manufacturer.In the event of an anomaly, contact the supplier of your medical device. do not use any repairer that could make yourmedical device unsafe for you and your patients.The pre-programmed modes of the endodontic motor are programmed for Satelec files in rotation and reciprocation; andSatelec files are suitable for working with these parameters.When using drills, cutters or other endodontic accessories, follow the manufacturer's recommendations for maximumspeed, torque, angle or forward and reverse directions.4 - desCrIPtIon4.1 PhysICal desCrIPtIon- Electronic control console with mOTOR mount- Footswitch- power